Your Single Source for Material Handling Equipment

The HULKMAN FD100 10 ton diesel forklift provides a 10,000 kg rated capacity at a 600 mm load center. It combines diesel power, a reinforced wide-view mast, dual front pneumatic tires and configurable mast and attachment options for heavy-duty material handling.

The HULK QB100 is a heavy-duty 10 ton electric tow tractor designed for internal material transfer in factories, warehouses and industrial facilities. Its 48 V electric drive system, seated operating position and compact 2,200 mm turning radius support controlled towing across frequently used transport routes.

The HULK FD50 and FD70 5 ton 7 ton diesel forklift series provides 5,000 kg and 7,000 kg rated-capacity options for heavy-duty industrial material handling. Available configurations include different mast heights, engine choices, operator options and load-handling attachments.

The HULKMAN FD30 is a 3 ton 4WD rough terrain forklift for lifting and transporting palletized loads across configured outdoor work routes. It combines a 3000 kg rated capacity, 500 mm load center, four-wheel drive, 3000 mm standard lift height and 230 mm ground clearance.

The HULKMAN FD30 is a 2WD rough terrain forklift with a straight mast, deep-tread tires and a seated operator compartment. It is intended for material lifting and transfer across configured outdoor work areas where surface conditions may be less uniform than a conventional warehouse floor.

The HULK625 is a 2.5 ton 5.9m telehandler designed for lifting, carrying and placing palletized loads at height or across a forward working distance. It combines a 2500 kg maximum load, 5900 mm maximum lift height, 3300 mm forward reach, four-wheel drive and three listed steering modes.

The HULK TR750 5 ton telehandler combines a 5,000 kg maximum load with a 7,000 mm maximum lifting height and 3,600 mm maximum forward reach. Four-wheel drive and three steering modes support lifting and material positioning across suitable construction, agricultural and outdoor work sites.

The HULK730 is a 3 ton 7m telehandler designed for lifting, carrying and placing palletized materials at height or across obstacles. It combines a listed 3000 kg maximum load, 7000 mm maximum lift height, 3600 mm maximum forward reach, four-wheel drive and three selectable steering modes. Actual lifting capacity varies with boom height, forward reach, attachment and load center. The approved load chart must be checked before operation.